Freshwater sailed J/120 since the late '90's; large sail inventory with desirable Carbon mast.
Electronics including Ockams & Autopilot.
Stored indoors(heated) 2002-2011 and indoors(cold) since 2015.
Great boat for family adventures on or off the race course.
Contact Jim @firstname.lastname@example.org for additional details or to arrange a viewing.
White fiberglass balsa cored hull; balsa cored fiberglass deck is white Awlgrip and cloud grey non-skid (new 2009).
Stainless steel stanchions & lifelines. Fin keel, spade rudder.
Port, starboard and stern boarding gates
Fin keel w/anvil base
Stern mounted swim ladder at transom platform
Danforth anchor w/6’ chain and 200’ line
Anchor Locker, removable anchor roller
LED forward and aft running lights, tri-colour on mast
Sail cover, wheel cover
Steel storage cradle with 6 pads
MOB pole, life sling
Radar reflector, bell and horn
Sleeps 7: two berths to port, one to starboard, V-berth forward, double berth in aft cabin
Head with shower
Varnished teak and holly sole
Nine opening ports
Three deck hatches
Leecloths for lower berths
Two burner Origo 6000 alcohol stove with oven
Hot and cold water pressure
UK Mainsail, Kevlar tape drive, w battens, 2004, single reef
UK Mainsail, Kevlar tape drive, w battens, 2008, double reef
UK #1 Kevlar Tape Drive LM 155% - 2004
UK #1 Kevlar Tape Drive LM 155% - 2008
UK #1 Kevlar Tape Drive HM 144% - 2005
UK #2 Kevlar Tape Drive Furler 135% - 2009
UK #3 Kevlar Tape Drive 100% - 2005 with three battens
#4 Kevlar Tape Drive (SHORE) – pre 2002
Storm Jib – heavy Dacron (SHORE) – 2000 with sheets attached
Storm tri-sail Dacron – 2005
Two spinnaker snuffers
UK red nylon 0.6 oz runner 165 m2 1999 (SHORE) (TWS 8-15, AWA 110-165)
UK red Airex 0.6 oz runner 165 m2 2008 (TWS 10 to 20, AWA 110-165)
UK white & aqua nylon 0.75 oz AP 165 m2 2006 (TWS 6-20, AWA 80-130)
UK white and blue nylon 0.5 oz reacher 155 m2 2005 (TWS 5-10, AWA 50-100)
UK white nylon 1.5 oz heavy reacher 120 m2 2007 (TWS 6-25, AWA 50-165)
“Daisy” staysail 0.5 oz airex with vectran pennant 2009
Two spinnaker halyards, 11 mm
Two genoa halyards, 12 mm, one new in 2007
One main halyard, 12 mm, new 2007
Vectran 10 mm attached to mast (2)
Heavy 12 mm sta-set with shackles (2) attach to vectran
Navtec remote hydraulic backstay adjuster
Harken MK2 roller furling
Harken mainsheet traveler, windward sheeting car system
Lewmar ST winches: (2) #50, (6) #40
Robertson SimRad AP20 autopilot (new in 2008)
Ritchie 5” compass on binnacle
Ockam depth sounder
Ockam wind instruments
Garmin model 2006 GPS
Yanmar 38hp diesel inboard; model # 3JH2E; s/s shaft; folding bronze prop @850hrs use as of 8/15.
Shore power with 50 foot cord
110v battery charger
LED forward and aft running lights, tri-colour on mast
J1120 Specifications Hull & Deck o Lloyd's approved Baltek Contourkore end grained balsa composite construction using biaxial and unidirectional glass with vinylester resin on the outer hull layer. o TPI patented SCRIMP resin infusion system molding process for optimum laminate strength with 65-70 per cent glass content in structural skins. o TPI 10 year transferable warranty against hull blistering. o 6,000 lb. 7.0' draft, variable chord, high lift, lead keel bolted and epoxy bonded to deep molded stub w- sump. o Off-white deck with a high traction non-skid. o Single tapered boot stripe. o Low maintenance extruded white ORC 1.5" foredeck, winch grinder, and helmsman toe-rails. T-track toe-rails from mast aft to stem. o Bow locker with deck hatch for anchoring gear and fully rigged asymmetrical contained in a snuffer sock. o Large cockpit storage locker & 2 lazarette lockers. o Watertight forward collision bulkhead (w- bow locker only). o Molded stem platform w- swim ladder. o Molded spray shield with dodger storage and companionway instrument pod. o GRP molded structural bulkhead supporting chainplates bonded to hull, deck, and mast step. o All intermediate bulkheads glassed to hull and deck for stiffness. o Infused directly with primary lamination. o Custom fabricated I-beam aluminum mast step. o Heavy-duty fiberglass floor stringer grid infused into hull. Propulsion & Steering o Yanmar 3JH2-E 38 hp diesel engine with hour meter & 100 amp alternator, fresh water-cooling, and Racor fuel filter. o Max Charge external regulator with temperature sensor for alternator. o Yanmar engine panel recessed in cockpit includes tachometer w- fuel gauge, alarms for oil, battery, night light, and temperature o OLR 100 engine insulation with removable engine box. o 27 gallon fuel capacity with baffles and inspection - clean out. o 17"x16" Martec folding prop with 1" SS shaft. o Volvo drip-less shaft gland. o Balanced spade rudder w- unidirectional glass & large diameter shaft mounted in Harken bearings exceeding ABS specs. o Edson 48" Diamond Series white aluminum wheel with natural leather grip on custom molded pedestal with 5" Ritchie compass, brake, and wheel height stainless guard. Gear ratio of 1:1 to facilitate installation of self-steering devices. o Anodized aluminum emergency tiller. Plumbing & Electrical o Manual bilge pump in cockpit. o Electric bilge pump w- switch & check valve. o Manual fresh water foot pump in head and galley. o 75 gallon water capacity with two baffled tanks under settees. o Raritan Marine head with 14 gallon holding tank and "Y" valve and overboard discharge pump. o Ice box drain with valve. o Head - shower sump pump. o Hot & cold pressure water system with 6 gallon water heater. o Cockpit fresh water shower. o Five Marelon seacocks and double-clamped hoses below the waterline. o Deluxe lighting package with overhead halogen in galley, dedicated swing out nav light, swivelling tulip & dome lights o Two 105 AH gel-cell deep cycle batteries. o Bass 12 VDC metered panel. o Bass battery switch with 100 amp DC main breaker. o 110V shorepower system including 110V panel, three 110V outlets, 50' shore cord and receptacle. o UL approved stranded, tinned copper ABYC color coded wiring throughout. o Navigation lights and steaming light. Deck Hardware o Two Harken 48.2 STA (self-tailing) primary winches. o Four Harken 44.2 STA halyard & mainsheet winches. o Two 10" Speed-Grip and two 8" B8AL aluminum lock-in winch handles with three PVC handle holders. o 2:1 Mainsheet system of Harken Black Magic Blocks with three 75 mm 1969 leading to 1955 cheeks to P&S mainsheet winches. o Harken adjustable mainsheet traveler with 4:1 purchase, includes 560 track, 558 car, 1515 controls, 564-565 track end with integral cams. o Harken clear anodized jib & genoa tracks & end-stops with four Harken 1997 T-Track cars. o Harken Black Magic checkstay blocks system including two 57 mm 1958 mounted to backstay chainplate and two 1963 transom cheek blocks. o Harken Black Magic 75 mm 1973 double footblocks outboard of cockpit for checkstay tails & spin sheets. o 150 cams near primaries for spin. sheets when not in use. o Disappearing checkstay system with three Harken 082 bullets, hose clamps and shock cord. o Harken 1969 spinnaker sheet blocks on Wichard 6544 U-bolts fwd. of stern pulpit legs. o Six Harken Black Magic 1958 halyard - reef turning blocks mounted on Wichard #6533A "U"-Bolts. Halyards lead aft through two Schaefer triple organizers to Spinlock stoppers. o Roller furling control line w- Harken 168 foredeck block, SS lined bullseyes and Harken 150 cam cleat w-328 cam fairlead. o 2:1 J-Sprit control line leading to two Harken 027 Sprit blocks, 023 block on forward bulkhead and aft through bulkheads to cockpit 150 cam. o Two cockpit snuffer control 150 cams 6" behind two SS lined bulls-eye fairleads. o Two bow chocks, two 10.5" bow cleats, two 8" stern cleats. o Custom SS stemplate w- tack fitting & attachment studs for optional anchor roller, chainplates, & backstay tang. o Five Lewmar Ocean Series Hatches. o Five Bomar aluminum framed cabin opening ports and one fixed port on cabin sides and three Bomar cockpit opening ports. o Thurston companionway dodger with side curtains mounted against splash molding w-boot. o Mainsail cover with J-120 emblem (to match dodger color) o Lexan companionway drop board with nylon storage rack in cockpit locker. o Double 5-32" coated lifelines & tapered stainless stanchions w- custom bases, double SS bow & stern rails, and stern gate. o Four 12"x24" poly mesh line bags. o Teak flag staff and 3x5 American flag. o Three helmsman side & centerline seat cushions. o Four custom acrylic covered AC hose lifeline covers for helmsman (to match non-skid deck color). Galley o Gimballed, 3 burner (including oven), non-pressurized Origo alcohol stove - oven w-SS safety bar & cutting board. o Highly polished stainless double sink recessed below 1-2" off-white Fountain head counter covering. o Vertical stainless grab post. o Molded 6.0 cu.ft. icebox with 4" foam insulation, dual lids, utility storage shelf and slider. o Two dry goods storage areas w- shelf & acrylic slider covers. o Cup, bowl and plate storage on aft galley bulkhead. o Two utensil drawers o Pot storage cabinet with mid-height shelf below drawers. o Laminated cold molded fiddles. o Additional pot and pan storage under oven. o Trash storage under sink w- flip lid access. o Cabinet for cleaning supplies under sink. Mast & Boom o Hall Spars 6061-T6 tapered aluminum performance mast section with double airfoil spreaders, finished in off-white Awlgrip, w- painted black bands, steaming light, internal wire conduit and pre-drilled head ventilation holes. o Mast fitted with single climbing step and two CL219 clamcleats for temporary cleating of halyards when hoisting sails alone. o Hall Spars boom w- welded end fittings, 8:1 internal outhaul purchase system, mainsail reef sheaves, mainsheet bail, and vang lug. Finished in off-white Awlgrip w- painted black band. o Retractable carbon fiber J-Sprit extendable to 7' beyond bow w- molded GRP end caps. Standing & Running Rigging o Continuous Navtec Rod System w- Series 200 turnbuckles. -12 headstay, -12 upper - lower shrouds, -10 interm, and -10 backstay. o Harken split-drum 1.5 headsail furling system. o Sailtec -12 integral hydraulic backstay. o Hall integral C-24 Quik Vang with 8:1 Harken purchase. o Color-coded running rigging package with tapered spinnaker halyard and checkstays, all halyards Vectran - Spectra or Technora, low-stretch polyester sheets, control lines, and reef lines. Interior o White Formica paneling with varnished teak cold molded trim, teak drawer and cabinet faces. o Forward double V-berth measures 75" x 80.5" x 26" o Vinyl lined hull siding throughout. o Varnished teak & holly cabin sole. o Forward cabin w- private head entrance, hanging locker with mesh cover, changing seat with cushions, storage below, duffel storage bin below berth, and bureau with drawers to starboard. o Aft cabin to starboard including hanging locker with mesh cover, changing seat outboard w- storage under, large berth measuring 48" x 78" x 29". o Settee berths in main cabin with large backrest storage compartments, shelves and storage outboard of back rests. o Deluxe bolstered cushions w- choice of nylon fabric colors. o Drop-leaf table with cold molded fiddles & stainless base. o Large chart table w- chart storage and hinged overhead electrical & instrumentation panel. Tool storage below hinged seat. o Head with two access doors (from fwd stateroom and main cabin) including a manual shower, sink, vanity, mirror, and storage. This area contains mast & separate sump with grate. o Stainless companionway ladder with varnished teak treads & non-skid strips. o Vinyl overhead in main, forward and aft cabins.
130 Marina Rd, Suite 202
PO Box 546
CHESTER, NS B0J 1J0