Transported to Lake Champlain in 2011. Beautifully maintained with many upgrades.
Detailed itemization of upgrades available upon request.
Please call ahead to see.
Please contact Bruce Hill Yacht Sales Inc. at (802) 985-3336
Altre Caratteristiche, Attrezzatura ed Informazioni:
Nome della barca
Designer: Tim Jackett
Chiglia: Chiglia standard
Tipo di carena: Mono scafo
L.F.T. Lunghezza fuori tutto: 38 ft 0 in
Larghezza: 12 ft 6 in
Lunghezza al galleggiamento: 32 ft 6 in
Pescaggio massimo: 7 ft 3 in
Dislocamento: 15950 lbs
Zavorra: 6000 lbs
Altezza in cabina: 6 ft 5 in
: 16350 lbs
Potenza totale: 37 HP
Marca motore: Yammer
Anno di costruzione: 2002
Modello motore: 3JH3E
Tipo motore: Entrobordo-EB
N. ore del motore: 8
Elica: Elica tripale
Potenza Motore: 37 HP
Numero di serbatoi d'acqua dolce: (80 Galloni)
Numero di serbatoi di carburante: (38 Galloni)
Numero letti singoli: 7
White NPG/ISO gelcoated hull, hand laminated with alternating layers of strand mat and uni-directional "E" glass locally reinforced. Fully cored with high strength, impact resistant synthetic core for stiffness with solid glass at all thru hull, chain plate and keel installations. Gelcoat backup layer is laminated and chemically bonded using a 4mm barrier coat of vinylester anti-corrosive resin for blister resistance. 90º throw flush thru-hull fittings. Bulkheads and floor timbers are bonded using advanced adhesive technology. Built to meet ABS Plan Certification.
Keel #1 Keel Type: Beaver tail Ballast: 6200 lb Displacement: 16150 sq ft Max Draft: 5.00 ft
Forecabin with vanity and sink, lockers, shelves and hanging locker
Furniture grade main cabin settees and seats with contoured cushions
Main cabin with cherry hardwood cabinets throughout
Large storage outboard of main cabin seatback
Drop-leaf centerline table with table storage
Full navigation station aft to port Navigation locker with storage space for extensive electronic installation (3) drawers and tube chart storage
Aft cabin with a double berth, hanging locker and shelves
Storage below berths.
(2) Helmseat storage lockers.
Propane gas storage for two tanks.
Hinged storage on top of engine box.
Cockpit seat locker port.
Main cabin settee, converts to double.
Jensen Stereo with cockpit speakers
Fuel: 38 gal
Water: 80 gal (2 tanks)
Holding; 24 gal
3 burner Force 10 gimballed LPG stove with oven and broiler
Double stainless steel galley sinks
9" deep Molded top and front load ice box, 4" foam insulated
Built-in trash bin
Hot and cold pressure water and manual fresh water pump
80 gallon freshwater aluminum tank
Extensive lockers, shelves and dovetail drawers
38 Hp diesel with console mount controls and instrument panel. 38 gallon fuel capacity with remote gauge. Racor fuel filter/water separator. 16" Fixed 3-blade propeller on stainless shaft. Brass interior cabin dome lights and directional lights. Navigation lights. Electric sump pump. Electric bilge pump. 12 volt DC metered panel. 110 volt AC shorepower with distribution panel. 50 ft. shorepower cord. (2) 105 amp batteries with selector switch Electrical bonding system. UL approved stranded, tinned copper ABYC color coded wiring throughout Wiring conduits provided for future installations.
Raymarine ST 6001 autopilot
Suunto D-135 Compass
Raymarine ST-60 depth sounder
Raymarine ST-60 speed/log
Raymarine RL72C GPS
Raymarine RL72RC chart plotter
Raymarine RL72RC 2kw radar
Standard Horizon Spectrum VHF radio with DSC and remote access mic
Raymarine ST-60 wind speed
Raymarine ST-60 wind direction
2016 Lake Champlain chart plotter updates AND paper charts
Teak cockpit combing
ROCNA 20KG (44lb) anchor with 100' chain and 150' rode
Fortress SFX-23 anchor with 30' chain and 200' rode
Lewmar electric windlass with bow foot controls
4 Fenders with covers
6 Dock lines
6 Life jackets
3 Fire extinguishers
Deck wash down pump with hull gate valve
Stitches Afloat custom canvan winter cover - Fall 2011
Sails and Rigging
Vermont Sail Partners Tridradial full batten main (loose footed) - 2012
White, off-white or sand gelcoated deck with patterned, contrasting non-skid.
Hand laminated sandwich composite of polyester resin, uni-directional "E" glass and end grain balsa core.
All hardware installation points are solid glass backed with aluminum plate or FRP backing plates. Joined to hull using stainless steel fasteners that are drilled and tapped into aluminum backing plates molded into hull flange, spaced to meet ABS specification for offshore sailing yachts. Bonded with 3M 5200™ sealant.
DINGHY MERCURY 270 SPORT GREY
Factory floor replacement 2016 with towing bridle
2012 Torqueedo travel 1003S
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.