Sunbird International Yachts Sales are please to bring to the market this one owner boat skipper chartered from new.
Well looked after and long and extensive service history.
Yanmar 3 JH4E 3 Cylinder inboard Diesel.
Sea and fresh water cooled
Engine Hours 05/09/2016 2614.8 Hours
3 Bladed bronze fixed prop on a shaft drive.
Serviced every years
12 volt system with 3 batteries. 1x engine 2x domestics.
Charged via Shore power charger and engine.
Full 220 volt Shore power system with cable.
Pressurized hot and cold water system
Water heater through shore power and engine.
360 litres water
200 litres Diesel
• L.O.A 12.15 m
• Hull length 11.82 m
• L.W.L. 10.35 m
• Beam 3.91 m
• Deep draught (min) 1.90 m
• Air draught (max) 17.70 m
• Light displacement 8 260 kg
• Fuel capacity 200 l
• Freshwater capacity 360 l
• Engine power 40 HP
Version 1 Forward cabin - 1 Toilet, 2 Aft cabins- 1 Toilet
Headroom: 1.87 m
Central double bed (2.00 m x 1.75 m x 0.44 m) - Marine mattress
Hanging locker - Glove box - Cubby hole locker - Storage drawer - Locker
2 Opening hatches with blind / Mosquito net
2 Hull portholes with curtain
Headroom: 1.89 m
Access through forward cabin
Washroom moulded in one piece to be watertight
Manual marine toilet
Washbasin - shower mixer tap hot / cold water
Toilet accessories: Glass holder - Towel rail - Bin - Paper dispenser
Cupboard and cubby hole
1 Opening deck hatch with shutter / Mosquito net
GALLEY TO PORT
Headroom: 1.93 m
Kitchen along the hull
White laminated worktop
1 Stainless steel sink 2 rectangular basins Stainless steel - 1 Mixer tap cold
water / hot under pressure
1 Gas cooker 2 hobs - stainless steel oven and grill replaced 2016, on mountings - 1 Stainless steel protection handrail
1 x 170 liter ice box, top opening 12 V Refrigeration unit
Fitted cupboards and closed cubbyholes (Shelf Bin - tea towel holder)
1 cutlery drawer
Cubbyhole with stainless steel beading
1 Hull porthole with curtain
1 Fixed deck house side window with concertina blind
1 Porthole opening onto coamimg in side window
CHART TABLE TO PORT
Table with flap - Glove box - Storage - Shelf- Moulded wood beading
Helmsman seat with cushion
Pivoting electrical panel enabling access to electrical connections
Navigation instrument panel (without instruments)
1 White light fitting / Red
1 Porthole opening onto coamimg in side window
SALOON TO STARBOARD
Headroom: 1.95 m
U shaped saloon bench - double density foam
Central bench seat with storage locker.
4 Matching decorative cushions
Saloon table in only 1 piece Varnished wooden top - veneering - Aluminium
1 Stainless steel handrail on aft washroom partition
Cubby hole lockers - Storage space along the hull - Storage under bench seat
STARBOARD AFT HEAD COMPARTMENT
Head compartment is a one-piece moulding for good water-tightness and easy maintenance.
Access through saloon and aft starboard cabin.
Large bowl manual marine toilet
1 x 80 L rigid holding tank as standard.
Worktop with washbasin and wood handrail.
Hot / cold water mixer tap.
2 closed shelves.
1 double mirror.
1 locker beneath washbasin with waste bin and paper holder.
1 towel holder on entrance door.
1 glass holder.
1 fixed side window with 1 opening port (300 x 120) in coaming and 1 curtain.
3 halogen deckhead lights, 1 switch.
Headroom: 1.90 m approx.
1 double berth 2.10 m x 1.50 m with high-density foam mattress for greater comfort.
2 closed shelves along the hull.
1 stowage locker.
1 hanging locker with 2 shelves.
1 benchseat/side table for access to berth
OPENINGS AND LIGHTING
1 fixed hull port with curtain.
1 opening port (300 x 120) in coaming.
1 port to cockpit (300 x 120).
1 opening deck hatch (260 x 260) with blind / mosquito screen.
3 halogen deckhead lights with integral switches.
• Woodwork Alpi Mahogany
• Parquet type laminated floors
• Cloth hull spar ceilings in saloon and cabins
• Blue Fabric upholstery
• Headroom: 1.90 m
• Wooden saloon companionway with moulded wood hanging steps with nonslip
• 2 Stainless steel handrails
Webasto Airtop with 6 outlets
• Standard mast 9/10 electro-polished aluminium installed on the deck,
2 levels of advanced cross trees
• Anodised aluminium boom
• Discontinuous stainless steel standing rigging
• 2 Backstays with turnbuckles
• Rigid kicking strap with tackle
• Genoa furling system with drum on the deck
• Mainsail sheet track
• 2 genoa tracks with piston adjusted traveller cars - 2 Genoa sheet return
• Rigging run back to cockpit (except boom topping lift)
• Complete running rigging: Main halyard, genoa halyard with clutch on mast
and cleat, Boom topping lift with cleat on mast, Mainsheet, 2 Genoa sheets
2 fast reefing ropes, 1 manual reef
• 8 Jammers
• 6 Jamming cleats
• 2 Self-tailing genoa sheet winches (H46.2 STC)
• 2 Self tailing coachroof winches (H40.2 STC)
• 2 Winch handles aluminium
• 2 Winch handle boxes
STANDARD SAIL LAYOUT AND AREA
• Mainsail (classic) 38.50 m²
• Genoa (140 %) 39.90 m²
• I 15.00 m
• J 3.95 m
• P 14.02 m
• E 4.80 m
Semi Battened Main March 2015 by Arun
Furling Genoa March 2015 By Arun
Original Factory Sails still available. Main and Genoa
2x Compasses each helm
Raymarine ST60 Tridata Log Speed and Depth
Raymarine ST60 Wind Speed and direction
Raymarine C80 Chartplotter
Raymarine RAY 54E VHF with DSC
Raymarine ST 6000 Autopilot
Raymarine Handheld remote for autopilot.
Handheld Cobra VHF
20KG Brittany Anchor with 50m Chain 10mm
9kg Kedge 14m chain 8mm and 40m Warp.
Quick 1000 Electric Windlass
Angel / Buddy (Shackle)
1x Electric Bilge Pump
1x Manual Bilge Pump
Seago 2.7m Dinghy new 2014
Honda 2.3 hp Outboard new 2014
5 warps and 8 Fenders and fender step.
Sprayhood with new windows 2016
Clock and Barometer
Radio and CD Player
8 man Liferaft new 2016 with Solas B grab bag
Fire Extinguishers 1x each aft cabin 1x Engine room auto 1x 4KG Cockpit all in date.
1x Danbouy 2x Liferings
Oscar recover System.
• Design made following European Directive requirements and according to
• Monolithic hull design in polyester
• Monolithic structural counter moulding laminated and bonded to the hull
• Deck in balsa and glass fibre sandwich covered in «diamond point» type
• Deck hull join screwed, stuck and banded with 1 solid wood bulwark
• Cast iron keel fixed with bolts and stainless steel backing plates
• Hung rudder with stainless steel stock
• White coloured hull - Hull decorated in pearl grey
In this case we are acting as brokers only. The Vendor is not selling in the course of a business. Whilst every care has been taken in their preparation, the correctness of these particulars is not guaranteed. The particulars are intended only as a guide and they do not constitute a term of any contract. A prospective buyer is strongly advised to check the particulars and where appropriate at his own expense to employ a qualified Marine Surveyor to carry out a survey and / or to have an engine trial conducted, which if carried out by us shall not imply any liability for such engine on our part.
Note to seller and purchaser: If the boat you are selling or purchasing is registered, please ensure that the registration is completed after the sale of the boat. If the purchaser wishes to cancel the registration is the duty of the seller to contact the Registry and inform them that the registration is to be cancelled. If the purchaser wishes to continue with the registration, it is the duty of the purchaser to complete the relevant forms and post off the bill of sale to the Registrar.
Ayrshire, KA22 8DB