This yacht has two main engines and two propellers and it is a development of earlier units built for the mercantile and pleasure boats markets. Her main characteristics are noticeable sea-keeping together with a good cruising speed and outstanding manoeuvrability in restricted waters.
Hull and superstructure’s designs together with internal subdivision to follow the General Arrangement Plan.
The above mentioned design may be slightly modified to satisfy various requests such as ducts, cable trunks, air conditioning trunks and to allow an improved distribution of internal areas.
The hull and the superstructure will be of aluminum-magnesium alloy, entirely welded; the structure of the hull has been designed to withstand rough sea conditions with four watertight bulkheads.
Type of vessel: hard chine hull, V bottom, transom stern with stair, flat keel, flaring bow.
Interiors: Owner’s suite on main deck, four double cabins or two double cabins and one VIP cabin, and crew cabins on lower deck as per General Arrangement Plan.
Weight reduction: During the whole building process, all dimensions and thickness indicated, as well as the equipment specification will be strictly followed in order to reduce weight as much as possible.
All accommodation, galley, laundry and the wheelhouse are to be air conditioned. The air conditioning installation is to be designed and supplied as an integrated package including all machinery, air handling units, ducting, outlets and controls. All air conditioning and chilled water system components including: fan coil units, isolating and balancing valves, heater, etc. are to be installed to allow easy access for maintenance. Where such components are installed behind accommodation lining, access hatches are to be provided.
The yacht and her equipment will be suitable for environmental and weather conditions usually found in tropical waters.
Length overall: 43.00m
Waterline length: 35.65m
Max beam: 8.00m
Moulded depth: 3.70m
Summer draught: 1.30m
Moulded displacement mass: 190t
Maximum speed: 30 knots
Fuel capacity: 35.000L
Fresh water capacity: 2.500L
Black and grey water 1.000L
Engines: 2 x MTU 16V 4000 M90 2720 kW @2100 rpm
Reduction gears: 2 x ZF BW 7555 red. 2.954:1
Bow thruster: Hydrosystems 74 kW hydraulic
Stabilizers: 4 x VT Naiad Marine 525 blade 2.33 m 2
Generators: 2 x Cummins Onan 80MDDCJ 80 kW 50 Hz
The yacht will have accommodation for up to 10 passengers and 6 crew members.
Rules and classification: The vessel, including its machinery, equipment and outfitting, is to be constructed, equipped and certified to comply with the Laws, Regulations, Rules and Conventions listed in the following sections and all amendments and additions thereto in force at the date of signing the Contract.
It is to be understood that anything not mentioned in this outline specification but required by the Classification Society or Regulatory Bodies is to be provided by the Builder.
The vessel is to be constructed under survey of Lloyd's Register (LR) to obtain the class notation: LR - 100 A1 SSC LMC UMS G6 and it will be compliant to MCA Rules, possibly Short Range under 300 GT.
The vessel is to be provided with a twin screw installation of adequate power to achieve the following performances, with clean hull and propellers and weather conditions up to and including Beaufort Force 2:
maximum speed (at half load displacement): 26 knots
cruising speed: 24 knots
The range shall be calculated at half load displacement with both main engines in operation and one generator at normal sea load with crew and guest areas air conditioning running.
The choice of the following items will be made among the samples suggested by the Builder:
• Soft furnishings, fabrics, drapery
• Handles, hinges and slides for furni-ture and doors
• Bathroom accessories
• Lights etc.
• Dinner set
• Kitchen households
Contact: Gaspard Milazzo
G-YACHTS - Buckingham Palace – 11, avenue Saint-Michel – 98000 Monaco
Tél. +377 977 705 43 - www.g-yachts.com