2016 Hardy Commander 32

Altre Caratteristiche, Attrezzatura ed Informazioni:

Dimensioni
L.F.T. Lunghezza fuori tutto: 9.60 m
Larghezza: 3.60 m
Pescaggio massimo: 0.90 m
Peso netto : 6500 kgs

Motori
Velocità  di crociera: 20 Nodi
Velocità  massima: 24 Nodi
Consumo: 220 nm

Opzioni motore
Engine Option 1: 2x Yanmar 4LH – STP 240 HP
 
Serbatoi
Numero di serbatoi d'acqua dolce: Acciaio innossidabile (340 Litri)
Numero di serbatoi di carburante: Acciaio innossidabile (870 Litri)

Interni
Numero cabine: 1
Numero di toilet: 1

Deck

• Generous self-draining side, fore deck and cockpit with moulded sand pattern non-slip finish
• All deck fittings are stainless steel grade 316
  Enclosed by bulwarks and 25mm diameter stainless steel pulpit and guard rails
• Opening through rails on either side of the deck for access ashore with wire strops (optional side concealed lights)
• Stainless steel rub rail
• Maxwell or similar vertical electric windlass on fore deck with controls at the helm position
• Delta 10/22 anchor and 30m of 8mm chain. The chain is marked at intervals
• Stainless steel bowplate on hull for protection from the anchor and chain
• 6 stainless steel mooring cleats
• Stainless steel bow roller
• 4 x fixed ventilators – 2 dorades and 2 flat mushroom types
• Ensign staff with socket
• Hardy plaques
• Stainless steel deck fillers for tanks

Aft Cockpit

•  Moulded self-draining cockpit with L-shaped seating/lockers to port. Lockable latches on locker lids
• Ventilated and drained gas locker
• Lockable cockpit floor lazarette lid
• Cockpit table (doubles as saloon table)
• Opening cover extending full height to the transom - Sunbrella
• Bases to take large or smaller table and/or pilot seat
• Seating with removable cushions and backrests – vinyl covered
• Steps to side deck
• Access through aft bulwark to bathing platform with gas locker below
• Dedicated space for life raft stowage in the aft bulwark
• Lazarette with painted plywood floor panels. Flocoat finish elsewhere

Wheelhouse/Deck Saloon

• Sliding opening side windows
• Alloy framed anodised sliding door or bi-fold teak doors into cockpit at Owner’s choice
• Instrument console fitted with engine instruments and compass
• Stainless steel steering wheel
• Engine and controls
• Fuel and water gauges
• Navigation and communication electronic equipment as specified
• 12VDC electrical control console and a dedicated chart table with flexi chart light
• 2 adjustable helm seats. Note – inner helm seat is removable and may be used near the saloon table or in the aft cockpit.
• 3 sets of wipers with washers to front windows
• L-shaped settee giving seating for 4 or more with lockers below
• Slide-out base unit to make settee into occasional berth
• A dining table that can be removed and stowed in a dedicated position forward or used in the cockpit
• Large locker and drawer unit with stowage for TV etc
• Two moveable seats that can be used at either table or in the cockpit
• Large Perspex opening sunroof (option electrically operated)
• 220VAC shore supply control panel on aft bulkhead
• Daily access hatches to engine room just inside the aft doors to the cockpit and just above the steps leading forward down into the galley
• Complete sole may be removed for maintenance access round each engine and gearbox and to the stern glands
• LED overhead lights
• 220VAC socket
• Curtains and carpet

Accommodations

Forward Cabin

• ‘V’ berths with double conversion
• Hanging locker, lockers below side decks either side and lockers below and between the berths
• Access to the chain locker via a watertight door behind a mirror
• Curtains and carpet from builder’s standard range
• 2 x LED overhead lights
• 2 x LED reading lights
• 2 x fixed portlights with curtains
• 220VAC socket
• 2 x fixed ventilators

Heads

• Combination shower head/tap
• Overhead light
• Toilet and washbasin set in a dedicated moulded unit with stainless steel sink, toiletry holder, stowage and mirror
• Shower rail and towel rail
• Compact manual marine toilet
• Opening portlight
• Fixed ventilator

Dinette

• U-shaped settee with large dining table that can be removed to its own dedicated stowage position forward of the heads
• Slide-out base unit with built-in locker and infill cushion to form double berth
• Lockers below settee and below side deck
• Opening portlight
• LED overhead light
• 220V AC socket

Galley

• Fitted out in teak, with laminate work surfaces
• Gas 2 burner cooker with oven (option 3 burner and/or grill)
• Double sink and mixer tap
• Various lockers and drawers
• Lighting above each worktop
• Dual voltage fridge/freezer
• Waste bin set into worktop
• Opening portlight
• 220VAC socket

External Links
Manufacturer Website